This remarkable formula keeps your spa hot tub water clean, sparkling bright and fresh with no harsh chemicals or irritating odours for 90 days. These powerful yet gentle cleansers remove contaminants to eliminate unsightly scum and foam and prevents scale or mineral deposits from forming.

Forget the shower after use, as AquaSafe leaves your skin feeling clean, soft and velvety smooth. With no corrosive chemicals in AquaSafe to cause rust, stains or tainted water, your pump, filter, heater and every part of your Spa in contact with the water will look better and last longer.

A spa hot tub sanitiser which is Free of chlorine and Bromine

100% bio-based, all natural Seaweed Enzymes

Add once every 90 days after spa hot tub water change

FREE from Chlorine or Bromine toxicity - completely
bio-degradable and non-toxic to the environment

FREE from itching, rashes, dry skin & burning eyes

FREE from daily maintenance and testing - NO more test kits!

FREE from chemical smells

•  How Does It Work?

1   Add a one bottle of AquaSafe to spas of 1200 - 2250 litres. If your spa is less than 1200 litres add 375ml.

2    After the water has reached the desired temperature (35-37ºc), check the pH level to ensure it is in the range of 8.0 to 8.4. You initially may need to check your pH levels on a weekly basis, although the AquaSafe should maintain the level automatically.

3    Rinse your filter every week or more frequently - based on bather usage. Use a jet attachment on the hose pipe to rinse thoroughly. Soak the filter in a filter cleanser overnight every 4 to 6 weeks, rinse with water and allow to dry before replacing.

4    Drain and refill your spa and add AquaSafe every three months.

We recommend the weekly use of a water clarifier to keep your water sparkling clear and a weekly shock to break down non-organic mater. After each application of water clarifier and shock run the spa for 20 minutes or until levels have returned to normal with the cover off.

It's as simple as that!